✨ New Arrivals Just Dropped!Explore
HomeStore

2004-2019 Powerstroke 0-6" Lift Recoil Traction Bar Mounting Kit F-150 4wd (BDS123419)

Product image 1

2004-2019 Powerstroke 0-6" Lift Recoil Traction Bar Mounting Kit F-150 4wd (BDS123419)

Description

Fits

Year Make Model Lift Location
2004-2019 Ford F150 4WD 0-6" Rear


Important: The mounting kits DO NOT include the Recoil Traction Bar, they need to be purchased separately. (BDS123409)

BDS Suspension's revolutionary spring-loaded, full-floating RECOIL traction bar system is engineered to improve traction and limit axle wrap without limiting suspension travel or decreasing ride quality.

Part Number: BDS123419

Features
  • Compatible with 0-6" of Lift
  • The bars are fabricated from 2" OD x 3/16" wall steel tubing with a threaded bung welded in toward the axle
  •  CNC machined end at the frame
  • Adjustable axle wrap control utilizing dual-stage resistance springs
  • Full-floating traction bar design will not bind throughout the full range of wheel travel and/or hinder suspension articulation
  • Spring preload can be adjusted on the vehicle without disassembling the traction bar
  • Adjustments can be made for optimum performance over a wide range of uses/terrain. 
  • (On-Road, Unloaded, Towing/Hauling, Off-Road, Competition pulling)
  • Traction bar ends are greaseable and rebuildable
  • Mounting brackets are bolt-on, only requiring minor drilling for frame mount installation.
  • These traction bars can be used on stock height or lifted trucks and work with both lift blocks and replacement leaf spring kits
  • 1-piece flex ball for up to 15-degrees of misalignment in either direction.
  • Forged flex ends use a forged housing with a large 1-1/4'' -12 threaded shank
  • Durometer-specific polyurethane bushing installed that free floats in the traction bar utilizing dual-stage internal compression springs
  • UHMW polyurethane bearings.

Includes:

  • Two Axle Mounts 
  • Two Frame Mounts 
  • Two Jam Nut Wrench
  • Eight 9/16” SAE Washers
  • One Bolt Pack (Frame Mounts)
  • One Bolt Pack (Traction Bar Hardware)
  • One Bolt Pack (Rivet Nut Install)
  • ...And More (See Instructions for full list)
Notes
  • Fits 0-6" of rear lift
  • Will NOT work with Standard Cab / Short Box
  • Will work with Ford Raptor
  • Will not work with AMP Research PowerSteps
Installation
  • Click Here For Installation Instructions
Warranty
  • Supplemental Drivetrain Limited Protection provided by 560Plus.com - 5 Year/60,000 Miles on Ford, Nissan, & Toyota vehicles and 5 Year/100,000 Miles on Dodge/Ram, GMC, & Jeep vehicles.
  • Free, no cost protection for BDS customers
  • Could save thousands of dollars on possible repairs
  • An easy online registration process
  • Available for most late-model vehicles
$67.32

Original: $192.35

-65%
2004-2019 Powerstroke 0-6" Lift Recoil Traction Bar Mounting Kit F-150 4wd (BDS123419)

$192.35

$67.32

Product Information

Shipping & Returns

Description

Description

Fits

Year Make Model Lift Location
2004-2019 Ford F150 4WD 0-6" Rear


Important: The mounting kits DO NOT include the Recoil Traction Bar, they need to be purchased separately. (BDS123409)

BDS Suspension's revolutionary spring-loaded, full-floating RECOIL traction bar system is engineered to improve traction and limit axle wrap without limiting suspension travel or decreasing ride quality.

Part Number: BDS123419

Features
  • Compatible with 0-6" of Lift
  • The bars are fabricated from 2" OD x 3/16" wall steel tubing with a threaded bung welded in toward the axle
  •  CNC machined end at the frame
  • Adjustable axle wrap control utilizing dual-stage resistance springs
  • Full-floating traction bar design will not bind throughout the full range of wheel travel and/or hinder suspension articulation
  • Spring preload can be adjusted on the vehicle without disassembling the traction bar
  • Adjustments can be made for optimum performance over a wide range of uses/terrain. 
  • (On-Road, Unloaded, Towing/Hauling, Off-Road, Competition pulling)
  • Traction bar ends are greaseable and rebuildable
  • Mounting brackets are bolt-on, only requiring minor drilling for frame mount installation.
  • These traction bars can be used on stock height or lifted trucks and work with both lift blocks and replacement leaf spring kits
  • 1-piece flex ball for up to 15-degrees of misalignment in either direction.
  • Forged flex ends use a forged housing with a large 1-1/4'' -12 threaded shank
  • Durometer-specific polyurethane bushing installed that free floats in the traction bar utilizing dual-stage internal compression springs
  • UHMW polyurethane bearings.

Includes:

  • Two Axle Mounts 
  • Two Frame Mounts 
  • Two Jam Nut Wrench
  • Eight 9/16” SAE Washers
  • One Bolt Pack (Frame Mounts)
  • One Bolt Pack (Traction Bar Hardware)
  • One Bolt Pack (Rivet Nut Install)
  • ...And More (See Instructions for full list)
Notes
  • Fits 0-6" of rear lift
  • Will NOT work with Standard Cab / Short Box
  • Will work with Ford Raptor
  • Will not work with AMP Research PowerSteps
Installation
  • Click Here For Installation Instructions
Warranty
  • Supplemental Drivetrain Limited Protection provided by 560Plus.com - 5 Year/60,000 Miles on Ford, Nissan, & Toyota vehicles and 5 Year/100,000 Miles on Dodge/Ram, GMC, & Jeep vehicles.
  • Free, no cost protection for BDS customers
  • Could save thousands of dollars on possible repairs
  • An easy online registration process
  • Available for most late-model vehicles