2022-2024 Cummins AMDP HP Tuners C&C Custom Tune File

Description

Fits

Year	Make	Model
2022-2024	RAM	6.7L Cummins C&C

Note:

• This is for C&C trucks only. Click Here for standard trucks.
• These are tune files only. You will need an HP Tuners MPVI device in order to flash the tuning onto your truck. If you require a device, be sure to select the add-on.

After rigorous testing, AMDP are offering their Custom tuning on the 2022-2024 6.7L Cummins Cab and Chassis models. These tunes are applied via the HP Tuners MPVI tuning device, unlocking your 5th Gen's true potential. This tune file is compatible with the RTD4, MPVI2. MPVI3 & MPVI4 devices 

These tune files will range from 0HP Modified up to three power levels. Still wanting more power? We can have these custom-tune files written to accommodate any modifications your truck may have, just let us know!

IMPORTANT: This process requires swapping the ECM to a 2019-2021 year model ECM.

We do not support lope tunes or smoke tunes.

Power Levels

Level 1
Level 2
Level 3

Notes

• This tuning is specifically for C&C trucks only. Click Here for standard trucks.
  
• No switch on the fly
• Only single power levels available at this time
• The latest HP Tuners BETA VCM suite MUST Be used. (Update before proceeding).
• This requires swapping the ECM to a 2019-2021 year model ECM.
• Your ECM Serial Number can be found on the middle line of the sticker on the back of the ECM.
• A Bypass cable is required to flash the truck.

Installation

Click here to view MPVI Flashing instructions

The latest HP Tuners BETA VCM suite MUST be used. (Update before proceeding).

1. With the original ECM installed pull a read with your MPVI device.
2. Email the read to [email protected] with the order number and ECM S/N on the sticker of the new ECM.
3. You will receive an email back with your tune file in 1-3 business days.
4. Disconnect batteries and install new ECM.
5. Reinstall Batteries after ECM installed.
6. Place the key in the RUN position ( make sure the engine is not running)
7. Install the bypass cable and MPVI device into the OBD
8. Open the tune file we provided via email and WRITE ENTIRE to the truck.
9. Once the truck is tuned, HP will prompt you to turn the key off then on. Do NOT turn the engine over. Leave the key in the on position for 10 seconds and then start the truck.