2023-2025 Powerstroke ICON Front and Rear Lift Kit (ICOK63214R)
Description
Fits
| Year | Make | Model |
| 2023-2025 | Ford | F-250 |
| 2023-2025 | Ford | F-350 |
Level up your 2023-2025 Superduty with this complete ICON suspension system. 4-5.5" of lift gets you the clearance for bigger tires without killing your ride quality. Everything in this kit is tuned to work together — springs, shocks, and hardware designed as a complete package.
Part Number: ICOK63214R
Features
- Fits 2023-2025 F-250 / F-350 4WD applications
- Bolt-in system fits in OE coil bucket location
- Ride height adjustable ICON 2.5 Series coilovers provide 4-5.5" of front lift
- Vehicle-specific shock valving provides unparalleled ride quality and control
- ICON 2.5 Aluminum Series piggyback reservoir rear shocks
- Increased wheel travel and ride quality over stock
- Fabricated radius arms provide increased strength, on vehicle caster adjustment, improved tire clearance at steering lock, and higher ground clearance
- Track bar drop bracket reduces track bar angle and corrects bump steer geometry
- Adjustable track bar allows fine tuning of track alignment and improves handling characteristics
- Dual steering stabilizer kit offers increased steering damping
- Corrosion resistant anodized steering stabilizer shock bodies with 5/8" shafts
- Stainless steel braided front brake lines
Important Notes
- Only fits 4WD models
- Not compatible with F-350 Cab & Chassis models
- Shocks are fully serviceable. Lift heights indicated are for a stock equipped vehicle.
- Removal of the coil centering cup in factory coil bucket required for installation
- Lift heights based on 4WD crew cab diesel
- Secondary shock options available, contact ICON for more details
- Fits single rear wheel models only
- Requires recalibration of Advanced Driver Assistance Systems (ADAS) after install
- If equipped with OnBoard Scales also requires sensor bracket part number 66204
- Super Duty diesel models without Tremor package will have front lift height range of 4-5.5" over stock
- Super Duty diesel models equipped with Tremor package will have front lift height range of 3-4.5" over stock
- Super Duty gas models without Tremor package will have front lift height range of 4.5-6" over stock
- Super Duty gas models equipped with Tremor package will have front lift height range of 3.5-5" over stock
- If installing with ICON 2.5 Series remote reservoir secondary shocks, reservoir doubler kit part number 611003 is also required
- Due to tight clearances and varying placement of vehicle’s wiring harness in the upper front-passenger wheel well area, installer must ensure adequate clearance between the harness, coilover reservoir, and other components to prevent chafing/damage to wire harness. If adequate clearance cannot be achieved, please contact ICON Customer Service.
Wheel & Tire Recommendations
- ICON Alloys - 17x8.5" w/ 5" Backspace / 6mm Offset
- ICON Alloys - 18x9" w/ 5.25" Backspace / 6mm Offset
- ICON Alloys - 20x9" w/ 5.25" Backspace / 6mm Offset
- Tires: 37" x 12.50" (Larger tires may fit but fender trimming and modifications will be required.)
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Description
Fits
| Year | Make | Model |
| 2023-2025 | Ford | F-250 |
| 2023-2025 | Ford | F-350 |
Level up your 2023-2025 Superduty with this complete ICON suspension system. 4-5.5" of lift gets you the clearance for bigger tires without killing your ride quality. Everything in this kit is tuned to work together — springs, shocks, and hardware designed as a complete package.
Part Number: ICOK63214R
Features
- Fits 2023-2025 F-250 / F-350 4WD applications
- Bolt-in system fits in OE coil bucket location
- Ride height adjustable ICON 2.5 Series coilovers provide 4-5.5" of front lift
- Vehicle-specific shock valving provides unparalleled ride quality and control
- ICON 2.5 Aluminum Series piggyback reservoir rear shocks
- Increased wheel travel and ride quality over stock
- Fabricated radius arms provide increased strength, on vehicle caster adjustment, improved tire clearance at steering lock, and higher ground clearance
- Track bar drop bracket reduces track bar angle and corrects bump steer geometry
- Adjustable track bar allows fine tuning of track alignment and improves handling characteristics
- Dual steering stabilizer kit offers increased steering damping
- Corrosion resistant anodized steering stabilizer shock bodies with 5/8" shafts
- Stainless steel braided front brake lines
Important Notes
- Only fits 4WD models
- Not compatible with F-350 Cab & Chassis models
- Shocks are fully serviceable. Lift heights indicated are for a stock equipped vehicle.
- Removal of the coil centering cup in factory coil bucket required for installation
- Lift heights based on 4WD crew cab diesel
- Secondary shock options available, contact ICON for more details
- Fits single rear wheel models only
- Requires recalibration of Advanced Driver Assistance Systems (ADAS) after install
- If equipped with OnBoard Scales also requires sensor bracket part number 66204
- Super Duty diesel models without Tremor package will have front lift height range of 4-5.5" over stock
- Super Duty diesel models equipped with Tremor package will have front lift height range of 3-4.5" over stock
- Super Duty gas models without Tremor package will have front lift height range of 4.5-6" over stock
- Super Duty gas models equipped with Tremor package will have front lift height range of 3.5-5" over stock
- If installing with ICON 2.5 Series remote reservoir secondary shocks, reservoir doubler kit part number 611003 is also required
- Due to tight clearances and varying placement of vehicle’s wiring harness in the upper front-passenger wheel well area, installer must ensure adequate clearance between the harness, coilover reservoir, and other components to prevent chafing/damage to wire harness. If adequate clearance cannot be achieved, please contact ICON Customer Service.
Wheel & Tire Recommendations
- ICON Alloys - 17x8.5" w/ 5" Backspace / 6mm Offset
- ICON Alloys - 18x9" w/ 5.25" Backspace / 6mm Offset
- ICON Alloys - 20x9" w/ 5.25" Backspace / 6mm Offset
- Tires: 37" x 12.50" (Larger tires may fit but fender trimming and modifications will be required.)













