✨ New Arrivals Just Dropped!Explore
2023 Powerstroke ICON 2.5 Front and Rear Lift Kit (ICOK62561)
Description
Fits
| Year | Make | Model |
| 2023 | Ford | F-250 / F-350 |
Transform your 2023 Ford Super Duty with this complete ICON suspension system delivering 2.5" of lift. Purpose-built springs, shocks, and hardware work together as a matched package for improved clearance, ride quality, and off-road capability.
Part Number: ICOK62561
Features
- Approximately 25% increased front wheel travel over stock
- ICON-engineered dual rate coil springs deliver exceptional vehicle control over varying terrain
- ICON shocks feature vehicle specific tune for superior performance and ride quality
- Shocks are fully rebuildable and revalvable
- Corrosion resistant anodized shock bodies with 5/8" shafts
- Lifetime guarantee against coil spring breakage or sag
- Lifetime guarantee against ICON fabricated component breakage or manufacturer defect
- Wheel & Tire Recommendations:
- ICON Alloys - 17x8.5" w/ 5" Backspace / 6mm Offset
- ICON Alloys - 18x9" w/ 5.25" Backspace / 6mm Offset
- ICON Alloys - 20x9" w/ 5.25" Backspace / 6mm Offset
- Tires: 35" x 12.50" (Larger tires may fit but fender trimming and modifications will be required.)
- Important Notes:
- Only fits 4WD models
- Will not fit F-350/F-450 Cab & Chassis models
- Springs Are Rated For Diesel Engines Only
- An Adjustable Track Bar May Be Needed To Realign The Axle From Left To Right, Or To Add Additional Strength
- Lift Heights Based On 4WD Crew Cab Diesel
- Rare Cases Require A 2.6 Degree Alignment Cam On One Side Of Vehicle For Proper Caster Split
- Requires recalibration of Advanced Driver Assistance Systems (ADAS) after install
- Will not fit 2024 models
- Trucks equipped with Tremor package with have front lift height of 1.5" over stock
- Brake line kit (Part # 61111) is optional for end users who do not want to bend the factory steel lines or are looking for a braided stainless upgrade (not necessary for complete install)
- ICON track bar bracket part # 64039 is also recommended to correct bump steer geometry
- Included rear shocks are compatible with 0-2" of rear lift over stock
$361.19
Original: $1,031.97
-65%2023 Powerstroke ICON 2.5 Front and Rear Lift Kit (ICOK62561)—
$1,031.97
$361.19Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Description
Fits
| Year | Make | Model |
| 2023 | Ford | F-250 / F-350 |
Transform your 2023 Ford Super Duty with this complete ICON suspension system delivering 2.5" of lift. Purpose-built springs, shocks, and hardware work together as a matched package for improved clearance, ride quality, and off-road capability.
Part Number: ICOK62561
Features
- Approximately 25% increased front wheel travel over stock
- ICON-engineered dual rate coil springs deliver exceptional vehicle control over varying terrain
- ICON shocks feature vehicle specific tune for superior performance and ride quality
- Shocks are fully rebuildable and revalvable
- Corrosion resistant anodized shock bodies with 5/8" shafts
- Lifetime guarantee against coil spring breakage or sag
- Lifetime guarantee against ICON fabricated component breakage or manufacturer defect
- Wheel & Tire Recommendations:
- ICON Alloys - 17x8.5" w/ 5" Backspace / 6mm Offset
- ICON Alloys - 18x9" w/ 5.25" Backspace / 6mm Offset
- ICON Alloys - 20x9" w/ 5.25" Backspace / 6mm Offset
- Tires: 35" x 12.50" (Larger tires may fit but fender trimming and modifications will be required.)
- Important Notes:
- Only fits 4WD models
- Will not fit F-350/F-450 Cab & Chassis models
- Springs Are Rated For Diesel Engines Only
- An Adjustable Track Bar May Be Needed To Realign The Axle From Left To Right, Or To Add Additional Strength
- Lift Heights Based On 4WD Crew Cab Diesel
- Rare Cases Require A 2.6 Degree Alignment Cam On One Side Of Vehicle For Proper Caster Split
- Requires recalibration of Advanced Driver Assistance Systems (ADAS) after install
- Will not fit 2024 models
- Trucks equipped with Tremor package with have front lift height of 1.5" over stock
- Brake line kit (Part # 61111) is optional for end users who do not want to bend the factory steel lines or are looking for a braided stainless upgrade (not necessary for complete install)
- ICON track bar bracket part # 64039 is also recommended to correct bump steer geometry
- Included rear shocks are compatible with 0-2" of rear lift over stock
